Before Use; Safety Instructions - JB Systems FL30-RGB-ET-5050-3M Mode D'emploi

ENGLISH
OPERATION MANUAL
Thank you for buying this JB Systems
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 Flexible "color changing" led strip containing 30 RGB leds/meter.
 Total length = 3m: 6strips, each 50cm long, can be can be extended very easily using included middle
connectors.
 Change colors from you lazy chair with the included IR-remote (color presets, fading effects, ...)
 IP65 rated, also suitable for outdoor use or use in kitchens & bathrooms.
 Can be easily bended to follow the curves of any surface
 Equipped with self-adhesive 3M
 Perfect color mixing thanks to 3in1 SMD LEDs
 24V version, with the big advantages:
 100% compatible with our LED Manager series (all separately available)
 Max. allowable length for one strip is twice that of 12V strips!
 Optional corners and other accessories available
 4pin connectors on both sides: easy connections without soldering

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 6 strips, each 50cm (Total = 3m)
 1 low voltage RGB power cable L=15cm
 1 IR-remote with color presets
 1 IR-receiver / RGB-controller
 6 middle connectors
 1 Power adapter 24Vdc/1A
 User manual

SAFETY INSTRUCTIONS:

This symbol means: indoor use only.
This symbol means: Read instructions.
 To protect the environment, please try to recycle the packing material as much as possible.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
 Keep the unit away from children.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Always unplug the unit when it is not used for a longer time.
JB SYSTEMS
®
®
product. To take full advantage of all possibilities and for your own
®
-tape on the backside for easy installation on any surface
1/19
OPERATION MANUAL
FL30-RGB-SET-5050-3M