Safety Information; General Information - Renkforce TB378 2.0 Mode D'emploi

5. Safety Information

Read the operating instructions attentively and particularly observe the safety notes. If the safety
notes and the information in these operating instructions regarding proper handling are not ob-
served, we assume no liability for any resulting injury/property damage. In such cases, the war-
ranty/guarantee will also lapse.
a) General Information
• The product is not a toy. Keep it away from children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy for children.
• Protect the product from extreme temperatures direct sunlight, high humidity, moisture, flammable gas-
es, vapours and solvents.
• Do not subject the product to mechanical stress.
• When secure operation is no longer possible, shut off the product and protect it from inadvertent use.
Secure operation is no longer warranted if the product:
- has visible damage,
- no longer works properly,
- was stored under detrimental ambience conditions for an extended period or
- was subjected to considerable transport strain.
• Handle the product with care. Impact, blows or falls from even a low height will damage the product.
• Also observe the safety notes and operating instructions of the other devices to which the product is
connected.
• Also observe the additional safety information in the individual chapters of these instructions.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Have maintenance, adjustment and repair work only performed by a specialist or specialist workshop.
Never open the device. Danger of electric shock!
• In case you have questions which are not answered in these operating instructions, contact our technical
service or other specialists.
• This device is a protection class II product. As a voltage source only a proper power socket of the public
power supply system may be used.
• The mains socket must be close to the device and easily accessible.
• Never touch the mains plug with wet or damp hands. There is the risk of a potentially fatal electric shock!
• Never pull the mains plug from the mains socket by the cable. Only pull it from the mains socket by the
intended grip areas.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mechani-
cal stress. Avoid excessive thermal stress on the mains cable from extreme heat or cold. Do not modify
the mains cable. Otherwise the mains cable may be damaged. A damaged mains cable can cause a
deadly electric shock.
27