Operation; Manual Control - Futurelight CP-16 SC3 Mode D'emploi

12) AUDIO/PULSE BUTTON
13) PAUSE BUTTON
With the pause button you can stop the mirror movement.
14) BLACKOUT BUTTON
If the LED is on, the respective scanner is in stand-by mode.
15) PROJECTOR SELECT BUTTONS
With the projector select buttons you can choose the desired projector. If the LED is off, the respective
scanner is in blackout mode. If the LED is permanently on, the projector runs through the current program. If
the LED flashes, the scanner can be controlled manually or be programmed. If several scanners are chosen,
they will be synchronized.
16) JOYSTICK
With the joystick you can move the mirror manually.

Manual control

Choose the desired projectors with the projector select switches 1-4 (LED flashes). You can also choose several
scanners, which will be synchronized then. The projector runs through the program until you move the joystick or
change any setting.
-You can move the mirror with the joystick.
The rotation speed and direction of the effects with effect wheel can be adjusted with the Rotation UP-DOWN
buttons.
The different values of the Color display:
Display
-
0
1
2
3
4
5
6
7
8
9

Operation

Color Display
Program-run A
White B
Turquoise C
Red D
Cyan E
Light screen
Magenta F
Light blue
Yellow
Green
Pink
1 2
Color
Blue
Orange
Rainbow 1 - low speed
Rainbow 2 - high speed
Step by step synchronous
sequence color changing
Step by step random
sequence color changing