Beta 1760DGT/2 Manuel De L'utilisateur page 70

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 86
6. Buzzer measurement
a) Press the power button to turn on, then press the "DMM" button to enter to the
multimeter function interface;
b) Press the up, down, left and right direction keys or F1, F2, F3, F4 multi-function keys
to select "Buzzer";
c) Insert the black pen into the input port of the COM banana socket, and insert the red
pen into the input port of the V/Ω/C banana port;
d) Connect the red and black forms to the measured point. If the resistance of the
measured point is less than 50 ohms, the instrument will emit "drop" sound.
7. Data hold function
Press the button
even if the input signal changes or eliminates, the value will not change.
Note: Please select the required measuring gear correctly and then measure again.
on the instrument, and the displayed data will hold on the display,
70

Publicité

Table des Matières
loading

Table des Matières