General Inspection; Use Of Safety Keyhole - Beta 1760DGT/2 Manuel De L'utilisateur

General Inspection

Please check the instrument as following steps after receiving an oscilloscope:
Check the shipping container for damage:
Keep the damaged shipping container or cushioning material until the contents of the
shipment have been checked for completeness and the instrument has been checked
mechanically and electrically.
Check the accessories:
Accessories supplied with the instrument are listed in "Accessories" in this manual. If
the contents are incomplete or damaged, please notify the franchiser.
Check the instrument:
In case there is any mechanical damage or defect, or the instrument does not operate
properly or fails performance tests, please notify the franchiser.

Use of safety keyhole

A safety keyhole is reserved on the back shell of the oscilloscope. Users need to purchase
the safety lock by themselves. Wrap one end of the safety lock around the hard-to-move
object, insert the other end into the safety lock hole, turn the key clockwise to lock the
instrument, and then pull out the key. In this way, the most basic anti-theft requirements
can be achieved.
51