Geberit Aquaclean Mera Comfort WC Instructions De Montage page 41

Re-assigning the remote control
The device can only be operated with a
single, assigned remote control.
Press the < + > button on the remote control
and the <up> button on the lateral control
panel for approx. 10 seconds until [Pairing ok]
appears on the display.
Result
The shower toilet can be controlled by
remote control.
B1238-002 © 01-2016
966.729.00.0 (03)
Testing automatic flush actuation
The following test must only be performed if the
device is fitted with the optional interface module
for flush actuation (art. no. 147.039.00.1).
Prerequisite
• The automatic flush actuation has been fully
installed
• The automatic flush actuation has been switched
on in the main menu [Basic settings]
• All plug connections are connected correctly
Apply a load to the WC seat for more than
10 seconds. Then remove the load.
kg
Result
A flush is actuated after around 5 seconds.
EN
41