EN
3
Close design cover.
Result
The LED on the lateral control panel lights up
blue.
The device is ready for operation.
Putting the remote control into
operation
Prerequisite
Function test of the device was performed
successfully.
40
1
2
If several devices of the same type are
installed in immediate proximity (e.g. in
hotels), remote control must be assigned.
See "Re-assigning the remote control".
Open battery compartment. Insert battery.
1
CR2032
2
3
Result
The display shows [Pairing ok] for
10 seconds.
If the [Pairing ok] message does not
appear, re-assign remote control.
B1238-002 © 01-2016
966.729.00.0 (03)