Dometic PERFECTVIEW M71L Instructions De Montage page 11

PerfectView M71L
You can find instructions for making these settings in the operating manual.
Note the following instructions during installation:
!
CAUTION!
•
Secure the monitor in such a way that it cannot become loose under any circum-
stances (sudden braking, accidents) and cause injuries to the occupants of the
vehicle.
•
Do not attach the monitor in the air bag deployment path, as this could cause injury
if the airbags are triggered.
Observe the following instructions when working with electrical parts:
When testing the voltage in electrical cables, only use a diode test lamp (fig. 1 1, page 3) or a
•
voltmeter (fig. 1 2, page 3).
Test lamps with a bulb (fig. 1 3, page 3) consume voltages which are too high and can dam-
age the vehicle's electronic system.
•
When making electrical connections, ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged through-holes without protection (fig. 3, page 4)
•
Insulate all connections.
•
Secure the cables against mechanical stress with cable binders or insulating tape, for example,
to existing lines.
Observe the following instructions when handling the LCD monitor:
!
CAUTION!
•
People (including children) whose physical, sensory or mental capacities or whose
lack of experience or knowledge prevent them from using this product safely
should not use it without the supervision or instruction of a responsible person.
Do not open the monitor (fig. 4, page 4).
•
Do not immerse the monitor in water (fig. 5, page 4); the monitor is not water-
•
proof.
The monitor must not impair your vision when driving (fig. 8, page 5).
•
•
Do not operate the monitor with wet hands.
•
Do not operate the monitor if the housing has been damaged.
EN
Safety and installation instructions
11