Connection And Preparation; Connecting External Devices; Connecting The Headphones - Grundig DTR 6000 X Mode D'emploi

OVERVIEW
INFO
Displays information on the Inter-
net, Podcast, DAB and FM radio
stations as well as when using the
music archive.
EQ
Opens the sound setting options,
which are: »Normal«, »Flat«,
»Jazz«, »Rock«, »Movie«, »Clas-
sic«, »Pop«, »News«, »My EQ«
and »My EQ profile setup«.
Switches the loudspeaker of the
device to mute and back on
again.
/
Sets the volume.

CONNECTION AND PREPARATION

Connecting external devices

Notes:
Switch the device off before you connect ex-
7
ternal devices.
1 Use a standard audio cable to connect the au-
dio output of the external device to the socket
»AUX IN« on the back of the device.
Connecting an MP3 player or a
USB memory stick
The device supports most MP3 Players or USB
memory sticks.
Note:
The device must be switched off while the
7
USB connection is being made. If it is not
switched off, data could be lost.
1 Connect the USB interface of the MP3 player
to the »USB« socket on the device using a
standard USB cable;
or
insert the USB plug of the USB memory stick in
the »USB« socket on the device.
30 ENGLISH
---------------------------------------------------------------------------------------------------------------------------------
Notes:
To remove the MP3 player or the USB memo-
7
ry stick, switch off the device and pull out the
cable for the data medium.
The USB socket on the device does not sup-
7
port a connection for a USB extension cable
and is not designed for directly connecting
to a computer.

Connecting the headphones

1
Insert the headphone plug (ø 3.5 mm) into the
»0« socket on the back of the device.
– The loudspeakers of the device are switched
off.
Note:
Excessive sound pressure from the earphones
7
or headphones can cause hearing loss.
---------------------------------------