Festo Soft Stop SPC11 ASI Serie Guide De Référence Rapide page 23

I/O configuration
I/O code 7
The function of input bit I4 and of output bit O4 can be
configured (see system manual for SPC11).
Address assignment
Output bits
D0: P.01
D1: P.02
D2: P.03
D3: P.04
1)
configurable, P.04 (factory setting) or stop.
Input bits
D0: P.01
D1: P.02
D2: P.03
D3: P.04
1)
configurable, P.04 (factory setting) or stop.
Festo SPC11−...−ASI 0511b English
D3 D2 D1
:
H
I/O I/O I/O
Description
Supplies a 1−signal when the drive is in
O1
the appropriate end position (P.01 or the appropriate end position (P 01 or
O2
P.02) or mid−position (P.03 or P.04).
Supplies a 1−signal for 50 ms when the
O3
drive moves past the relevant mid−posi drive moves past the relevant mid−posi
tion (P.03 or P.04).
1)
O4
Description
1−signal (min. 20 ms) issues order to
I1
move to appropriate position (when move to appropriate position (when
I2
there is a 0 signal at the other inputs there is a 0−signal at the other inputs
P...).
I3
1)
I4
D0
I/O
) p
l l f
( )
h h
23