Operating The Balance; Weighing - KERN CGB Séries Mode D'emploi

44

Operating the Balance

Weighing

Features
– Zeroing the balance
Depending on the prevailing ambient conditions,
the display may not show a zero readout even
though there is no load on the balance. If the weight
shown is less than 2% of the balance's maximum
weighing capacity, you can zero the balance.
– Taring the balance (saving a [container] weight in
the memory by subtracting it from the display)
Tare the balance with an empty container on the
weighing pan to obtain a readout of the net
weight after filling the container.
– Printing weights
Preparation
§ Turn on the balance:
Press [ON/OFF]
> A self-test is performed
$ To change settings: please see the chapter
on "Settings"
$ To load the factory settings: please see the
chapter on "Settings," parameter 9. - 1