Replacing The Torch Neck - Binzel Abicor ABIMIG A LW Mode D'emploi

®
ABIMIG

8.1 Replacing the torch neck

9 Disposal
NOTICE
• The specified maintenance intervals are guidance values and refer to
single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified
personnel (in Germany see TRBS 1203).
• Check the coolant hose, seals and connectors for damage or leaks and
replace if necessary.
• Check and clean the power contact surfaces on the torch neck and torch
neck seat.
• Always wear your personal protective equipment when performing
maintenance and cleaning work.
• Remove any adhering weld spatter.
• Ensure that all threaded fittings are tight.
 5.1 Setting up the torch on page EN-8
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards
and guidelines.
9 Disposal
EN - 21