Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
®
ABIMIG
NOTICE
• Ensure that the current contact areas on the torch neck and torch neck
seat are clean.
®
• For ABIMIG
W T, grease the O-rings with silicone-free lubricant
(192.0078). This makes it easier to insert the torch neck and extends the
service life of the O-rings.
For welding tasks for which a continuous wire guide is essential, the insulating
bush in the interior of the torch neck seat can be screwed out using a flat head
screwdriver (width approx. 10 mm).
ABICOR BINZEL offers an optional insulating bush for through-hole wire
guides.
To ensure perfect welds, please note the following:
1
Torch handle
2
Cooling liquid
Fig. 5
Pay attention to the residual coolant in the case of
ABIMIG
3
Sealing plug
4
Torch neck
®
W T torches
5 Putting into operation
1
2
3
4
EN - 15
Publicité
Table des Matières
