Meaning Of The Symbols; For Your Safety - Cub Cadet L20 Mode D'emploi

EN
Contents
Meaning of the symbols..................................... 18
For your safety................................................... 18
Safety information.............................................. 19
Intended use ...................................................... 21
Operating controls ............................................. 22
First use ............................................................. 22
Assembly ........................................................... 22
Operation ........................................................... 23
Servicing ............................................................ 24
Transport and storage ....................................... 25
Troubleshooting ................................................. 26
Warranty ............................................................ 26
CE Declaration of Conformity ............................ 26
Environmentally-friendly disposal ...................... 26
Before using your device for the first
time, read this instruction manual care-
fully and observe the instructions. Please
store away this operating manual for later
use or future owners.
Read all safety information and instructions. Fai-
lure to observe safety information and instructions
may lead to electric shock, fire and/or severe injury.
Keep all information on safety information and
instructions for future use.
The term "power tool" used in the safety informa-
Î
tion refers to mains-powered electrical tools (with
a mains cable) and power pack-powered elec-
trical tools (without a mains cable).
Before using for the first time, you must read the
Î
safety information!
Failure to observe the instruction manual and
the safety instructions can result in damage to
the device and danger for the operator and other
persons.
18

Meaning of the symbols

Note
Always keep these symbols in a legible
condition. Replace damaged or illegible
symbols.

For your safety

All persons involved with first use, operation and
Î
servicing of the device, must have appropriate
qualifications.
The making of unauthorised changes or con-
versions is not permitted
Do not make any changes to the device or convert it
to make other machinery. Such changes can result
in personal injury and incorrect operation.
Repairs to the device must only be performed
Î
by trained persons who have been instructed to
do so. When doing so always use original spare
parts. This ensures that the safety of the device is
maintained.
Meaning of the symbols
WARNING!
To reduce the risk of injury, read the
instruction manual!
Caution!
Do not allow any other persons to
enter the danger area.
Always remove the power pack prior
to working on the device!
Wear safety goggles!
Wear ear defenders!
Do not leave the device in the rain!