Safety And International Symbols; Applications; Know Your Unit - Cub Cadet CC4125 Manuel De L'opérateur

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the
operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used
in conjunction with other symbols or pictographs.
• WARNING - READ OPERATOR'S MANUAL
Read the operator's manual(s) and follow all warnings
and safety instructions. Failure to do so can result in
serious injury to the operator and/or bystanders.
• WEAR EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can
cause severe eye injury and hearing loss. Wear eye
protection meeting ANSI Z87.1 standards and ear
protection when operating this unit. Use a full face
shield when needed.
• PRIMER BULB
Push primer bulb, fully and slowly, 10 times.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel
• OIL
Refer to operator's manual for the proper type of
oil.

APPLICATIONS

As a trimmer:
• Cutting grass and light weeds
• Edging
• Decorative trimming around trees, fences, etc.
Other optional accessories may be used with your unit.
Refer to Operating the Rapid-Link System for a list of add-
ons.
NOTE: The below illustration may differ slightly from your
unit. For example, the picture shows a straight shaft.
Your unit may have a curved shaft.
Line
Cutting
Blade
Cutting Attachment
RULES FOR SAFE OPERATION

KNOW YOUR UNIT

Shaft
Housing
CC4125
Cutting
Attachment
Shield
Line
Cutting
Blade
SYMBOL MEANING
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF or STOP
• KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders, especially
children and pets, at least 50 feet (15 m) from the
operating area.
• HOT SURFACE WARNING
Do not touch a hot muffler, gear housing or cylinder.
You may get burned. These parts get extremely hot
from operation. They remain hot for a short time after
the unit is turned off.
• SHARP BLADE
WARNING: Sharp blade on cutting attachment
shield. To prevent serious injury, do not touch the
line cutting blade.
• THROWN OBJECTS AND ROTATING CUTTER
CAN CAUSE SEVERE INJURY
WARNING: Do not operate without the cutting
attachment shield in place. Keep away from the
rotating cutting attachment.
CC4175
Muffler Guard
Starter Rope Grip
On/Off Stop
Shaft Grip
Control
J-Handle
Rapid-Link™
Throttle
Control
Air Filter Cover
Cutting
Attachment
Shield
Cutting
Attachment
Spark Arrestor Spark Plug
Muffler
Primer
Bulb
Fuel
Cap
Oil Fill
Plug/
Dipstick
3