Product Maintenance - GUZZINI SOIREE Mode D'emploi

EN
SOIRÉE
Materials: PMMA (external dome)
PC – ABS (cover and rod)
Light source: LED 1.5w 3000k dimmable
Photobiological Risk: The appliance belongs to the risk group RG 0 at a distance of 20cm in accordance
with standard IEC/TR62778.
Thank you for choosing a Guzzini product.
Carefully read this instruction manual before installing the lamp and keep it for future reference.
This manual complies with the legal provisions of 10 April 1991, no.126 "Rules for consumer
information" and the Decree of 8 February 1997, no.101 "Implementing regulation".
UPON DELIVERY OF THE PRODUCT
The packaging of code 0458.00 – Wireless table lamp – figure A - contains:
1 dome – 1 lighting fixture with removable USB lid – 1 rod – 1 USB micro cable - 1 instructions manual.
The packaging of code 0458.01 – Soirée Lantern – figure B - contains:
1 dome – 1 lighting fixture with removable USB lid – 1 USB micro cable - 1 instructions manual.
Make sure there is nothing missing and that the packaging and lamp are not damaged. Should there
be any missing or damaged components, immediately contact your retailer (see paragraph "How to
proceed in case of request for assistance"), before going ahead with installation.
Keep the original packaging you might need to use it for transport purposes in the event of technical
support.
WARNINGS:
• Carefully read the mode of use of the product, the appliance safety is guaranteed only by respecting
the latter. Therefore, it is necessary to store them.
• The lamp is fitted with rechargeable lithium battery.
• The product must not be exposed to excessive heat such as hot surfaces and direct sunlight to avoid
dangerous overheating of the battery and deformation of plastic parts.
• Do not shield the product with objects or clothing that compromise its functionality.
• Upon installation, and whenever you intervene on the lamp, make sure that the product is not
charging. If the cable of this appliance is damaged, it must be replaced using an identical spare part of
the product.
• The warranty does not include any assistance or repair of the product or parts thereof damaged as
a result of its misuse. Any intervention on the product will void the warranty.
• Like all lithium ion batteries, the battery gradually looses energy and power over time and
with use. This effect is NOT covered by this warranty.
• The product must not be immersed in water or liquids.
• Only the lighting unit (5) equipped with USB cap, is considered for outdoor use, ensuring an IP54
protection rating.
• When using in suspension, always use the lighting fixture complete with dome. (B1)
10

Product maintenance

• When cleaning the product, this must not be charging.
• Clean the product using a soft cloth soaked in soap or neutral liquid detergents, preferably diluted in
water.
• Absolutely avoid using ethyl alcohol or detergents containing, even small amounts, acetone,
trichloroethylene and ammonia, solvents in general.
VERSION A – CODE 0458.00
ASSEMBLY INSTRUCTIONS
1) External dome, 2) lighting fixture with removable USB lid, 3) rod, 4) 1 USB micro cable
(figure A)
• Place the lamp on the bench-top.
• Unhook the external dome(1) from the lighting fixture(2) by pressing the sides of the lighting fixture(2)
hook (figure A1). Let the lighting fixture (2) slide gently.
• Remove the USB lid from the lighting fixture (figure C)
• Push the lighting fixture (2) on the top of the rod (3). Take the external dome (1) and place it over the
lighting fixture (2) making the hook come out from the slot.
• Only the lighting unit (5) equipped with USB cap, is considered for outdoor use, ensuring an IP54
protection rating.
INSTRUCTIONS FOR CHARGING THE BATTERY
CAUTION:
The battery must be charged in dry environments.
It is recommended to fully charge the battery on first use.
• Remove the USB lid from the lighting fixture (figure C)
• Insert the power supply (5V-2A USB characteristics - not supplied) into the power socket. "The
Class III appliance must be powered by a SELV source or equivalent" (e.g. complaint with 62368-1
– type ES1)"
• Connect the terminal with the USB-micro plug in the appropriate socket (pay attention to direction)
placed in the base of the lighting fixture (2) (figure G) and make sure that during charging the product
is firmly resting on a plane to avoid it falling.
• A blue LED, positioned near the USB socket, lights up during charging and turns off when
charging is completed. The battery recharges in about 8 hours, obtaining an optimal charge level. If
during charging the blue LED flashes, it means there are problems:
- The internal and/or external temperature drops below 0°C or rises above 45°C, charging
automatically stops and this is highlighted by the flashing of the blue LED. Once the atmospheric
conditions have been restored, the blue LED lights up steadily again;
- The battery is damaged (see paragraph "How to proceed in case of request for assistance").
• Autonomy when fully charged is about 9 hours. If the lamp is on and connected to the battery
charger, the indicated charging times are not guaranteed;
• When the red LED, positioned near the USB socket, lights up, it means that the battery has
dropped to 10%, it is recommended to connect it to the feeder. Moreover, to save battery life, do not
leave it connected to the feeder when the blue LED is off.
EN
11