Specifying The Character Width - Brother P-touch 1400 Mode D'emploi

Specifying the character width

Formatting the width of all text
Press t.
1
Press l or r until GLB WIDE is displayed.
2
Press u or d until the desired character width setting is displayed.
3
Press n. The selected setting is applied to the entire text.
4
Formatting the width of a line
1
Move the cursor to the line of text whose character width you wish to change.
Press g, then E.
2
Press l or r until WIDTH is displayed.
3
Press u or d until the desired character width setting is displayed.
4
Press n. The selected setting is only applied to the text line that the cursor is
5
positioned in.
The following width sizes are available for each text size as shown.
Width
NORMAL
Size
12 mm
(48 points)
9 mm
(36 points)
6 mm
(24 points)
4 mm
(18 points)
3 mm
(12 points)
2 mm
(9 points)
1 mm
(6 points)
NARROW MINIMUM WIDE
27