Brother P-touch 1400 Mode D'emploi page 68

Error Message
INPUT ABCD AT
BEGIN & END!
INSERT 1" TAPE
INSERT 24mm TAPE
INSERT 3/4" TAPE
INSERT 18mm TAPE
INSERT 1/2" TAPE
INSERT 12mm TAPE
INSERT 3/8" TAPE
INSERT 9mm TAPE
INSERT 1/4" TAPE
INSERT 6mm TAPE
LENGTH LIMIT!
MEMORY FULL!
Cause
• This message appears if a
letter between A and D has not
been entered at the beginning
and end of the bar code data
when the CODABAR
protocol is selected.
• This message appears if a 1"
(24-mm)-wide tape cassette
is not installed when
printing an Auto Format
template created for 1"
(24-mm)-wide tape.
• This message appears if a
3/4" (18-mm)-wide tape
cassette is not installed when
printing an Auto Format
template created for 3/4"
(18-mm)-wide tape.
• This message appears if a
1/2" (12-mm)-wide tape
cassette is not installed when
printing an Auto Format
template created for 1/2"
(12-mm)-wide tape.
• This message appears if a
3/8" (9-mm)-wide tape
cassette is not installed when
printing an Auto Format
template created for 3/8"
(9-mm)-wide tape.
• This message appears if a
1/4" (6-mm)-wide tape
cassette is not installed when
printing an Auto Format
template created for 1/4"
(6-mm)-wide tape.
• This message appears if you
try to print or use the
Preview function when the
length of the text is greater
than the 3' 1/3" (1 m) limit.
• This message appears if you
try to store a text file after
approximately 2000
characters have already been
stored in the memory.
Solution
• Enter a letter between A and
D at the beginning and end
of the bar code data.
• Install a 1" (24-mm)-wide
tape cassette.
• Install a 3/4" (18-mm)-wide
tape cassette.
• Install a 1/2" (12-mm)-wide
tape cassette.
• Install a 3/8" (9-mm)-wide
tape cassette.
• Install a 1/4" (6-mm)-wide
tape cassette.
• Delete some of the text.
• Delete an unwanted file to
make space for the new one.
61