Brother P-touch 1400 Mode D'emploi page 21

●
BLK LEN. (block length): * For the PORT Label Type mode:
●
FRAME:
●
PRINT (print order):
☞ For these types of labels, we recommend using Strong Adhesive Tape.
☞ The PRINT parameter is only available with the PANEL Label Type mode.
☞ Using the Numbering function with the PANEL Label Type mode makes it easy
to create a single label of multiple blocks containing ascending characters, which
can be used, for example, to label patch panels as shown above. Simply type in
one block of text, and then use the Numbering function to print several copies of
the text block on a single label while automatically increasing certain characters
in each block. (For details on the Numbering function, refer to
copies with incremental characters
14
0.80" to 8.00" (20 to 200 mm)
Default: 1.20" (30 mm)
* For the PANEL Label Type mode:
0.25" to 8.00" (6 to 200 mm)
Default: 1.20" (30 mm)
* For the PORT Label Type mode:
OFF, 1 , 2
Default: OFF
* For the PANEL Label Type mode:
OFF, 1 , 2
4 , 5
7 , 8
Default: OFF
FRONT, REVERSE
Default: FRONT
on page 32.)
, 3 , 4
, 3
, 6 ,
, 9
Printing multiple
,