Brother P-touch 1400 Mode D'emploi page 14

Strong Adhesive Tape
☞ For textured, rough, or slippery surface, we recommend using Strong Adhesive Tape.
☞ Although the instruction sheet included with the Strong Adhesive Tape
cassette recommends cutting the tape with scissors, the tape cutter that
this P-touch is equipped with is able to cut Strong Adhesive Tape.
Flexible ID Tape
☞ For applications that require more flexible labels, such as around sharp bends and
cylindrical objects, we recommend using Flexible ID Tape.
☞ Labels made with Flexible ID Tape are not designed for use as electrical insulation.
☞ When wrapping labels around cylindrical objects, the diameter of the object should be at
least 1/8 (3 mm), otherwise the label should be wrapped as a flag and the FLAG Label
"
Type mode should be used. In addition, the overlapping ends of the label or the label flag
should be at least 3/16
☞ The label may peel off cylindrical objects if the object is bent after the label is affixed.
Diameter > 3 mm
Diameter > 3 mm
Flag > 5 mm
(5 mm).
"
Overlap > 5 mm
Overlap > 5 mm
7