Table des Matières
Publicité
UK
Overload Switch
The Overload switch is situated at the back of the machine
beside the cable entry. If the appliance becomes too hot the
Overload switch will stop the machine automatically. If this
happens:
Turn Off the mixer.
1.
Reduce the load in the mixing bowl.
2.
Push the Overload switch back in to reset it.
3.
Allow the appliance to cool for 20 minutes.
4.
Note: In the event of a power cut the Overload switch will cut in to prevent the
appliance from restarting automatically when power is restored.
Note: Always disconnect the Planetary Mixer from the mains powers supply when not
in use.
Cleaning, Care & Maintenance
•
Always turn off the mixer and disconnect from the power supply before cleaning.
•
Use warm soapy water to clean the bowl and mixing attachments. Do not use abrasive cleaning
chemicals as these can leave harmful residues.
•
Clean the exterior of the appliance with a damp cloth.
•
Dry all parts thoroughly after cleaning.
•
Do not use jet/pressure washers to clean the appliance.
•
Clean the appliance regularly.
6
Overload
switch
Publicité
Table des Matières
