Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Zhongshan Youlong Kitchen Appliances Co., Ltd
Add.: Building B, E and part 3 of Building F, No. 103, Sanxin Road, Sanjiao,
ZHONGSHAN, Guangdong
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-
resistant work surface material to avoid larger deformation caused by
the heat radiation from the hotplate. As shown below:
L(mm)
W(mm)
520
590
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the
air inlet and outlet are not blocked. Ensure the ceramic cooker hob is in good work state.
As shown below
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 760mm.
The device meets the requirements of Regulation 2014/35/EU as well as
the
applicable
standards
2017+A1:2019+A14:2019+A2:2019,EN 60335-2-6:2015,EN 62233:2008
Name: APEX CE SPECIALISTS LIMITED
Add.:UNIT 3D NORTH POINT HOUSE,NORTH POINT BUSINESS
PARK,NEW MALLOW ROAD,CORK,T23 AT2P,IRELAND
logistic01@iamzchef.com
H(mm)
52
EN
60335-1:2012
D(mm)
A(mm)
48
560
21
+
A11:2014+A13:
B(mm)
X(mm)
490
50mini
Publicité
Table des Matières
Dépannage
