Sony SDM-X53 Guide De Configuration Rapide page 2

WARNING
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
Precautions
Warning on power connections
• Use the supplied power cord. If you use a different power cord,
be sure that it is compatible with your local power supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will not
conform to mandatory FCC standards.
For the customers in the UK
If you use the monitor in the UK, be sure to use the appropriate
UK power cord.
Example of plug types
for 100 to 120 V AC for 200 to 240 V AC
The equipment should be installed near an easily accessible outlet.
Installation
Do not install or leave the monitor:
• In places subject to extreme temperatures, for example near a
radiator, heating vent, or in direct sunlight. Subjecting the
monitor to extreme temperatures, such as in an automobile
parked in direct sunlight or near a heating vent, could cause
deformations of the casing or malfunctions.
• In places subject to mechanical vibration or shock.
• Near any equipment that generates a strong magnetic field,
such as a TV or various other household appliances.
• In places subject to inordinate amounts of dust, dirt, or sand, for
example near an open window or an outdoor exit. If setting up
temporarily in an outdoor environment, be sure to take
adequate precautions against airborne dust and dirt. Otherwise
irreparable malfunctions could occur.
Note on the LCD (Liquid Crystal Display)
Please note that the LCD screen is made with high-precision
technology. However, black points or bright points of light (red,
blue, or green) may appear constantly on the LCD screen, and
irregular colored stripes or brightness may appear on the LCD
screen. This is not malfunction.
(Effective dots: more than 99.99%)
About the built-in stereo speakers
Be sure to keep magnetic recording equipment, tapes, and floppy
discs away from the speaker's opening as the speakers generate a
magnetic field. This magnetic field may affect data stored on
magnetic tapes and discs.
2
(US)
Transportation
• Disconnect all cables from the monitor, and after fixing the
• When you transport this monitor for repair or shipment, use the
To view the Operating Instructions
on the CD-ROM
Notes
• To view the Operating Instructions on the CD-ROM, Adobe Acrobat
• More information on the commands, features, and tools of Adobe
Load the supplied CD-ROM into the CD-ROM drive of your
computer. After a while, the window of the CD-ROM will open
automatically. Select the area and click. Then double-click on
"index.html" in the "Manual" folder. The Operating Instruction
files will open.
Note
for 240 V AC only
Depending on a computer you are using, the window of the CD-ROM may
not open automatically. In this case, double-click on the icon of the CD-
ROM to open the window of the CD-ROM.
If you cannot open the Operating Instruction files
Adobe Acrobat Reader may not be installed on your computer.
You can download it for free from the Adobe Web site.
Setup
Unpacking
Make sure your carton contains everything listed below.
• LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Audio cord (stereo miniplug)
• CD-ROM (utility software for Windows/Macintosh, Operating
• Warranty card
• This Quick Setup Guide
LCD display at its highest point, grasp both side of the LCD
display firmly taking care not to scratch the screen when
transporting. If you drop the monitor, you may be injured or the
monitor may be damaged.
original carton and packing materials.
Reader (later than version 4.0) needs to be installed on your computer.
Acrobat Reader is available from the Reader's online Help.
Instructions, etc.)