Renault Radio Connect R & GO Mode D'emploi page 90

Masquer les pouces Voir aussi pour Radio Connect R & GO:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SYSTEM SETTINGS (3/3)
"BT settings" (Bluetooth®)
Go to the phone menu by pressing 10,
then select the section "BT Settings" by
pressing 5 or by turning 20 or 25and
pressing 22 on the steering column
control.
The available settings are:
– "Volume": adjustment of the ringtone
or call volume;
– "Ringtones": activation of the vehi-
cle's ringtone or of that transferred
from the phone;
To adjust the volume of the ringtone
when a Bluetooth® phone is connected
to the audio system, select "Volume" by
turning and pressing 5, or by turning 20
or 25 and pressing 22 on the steering
column control.
A new sub-menu appears:
– "Ringtone";
– "Call";
Pressing 6 takes you back to the
previous menu.
GB.32
– select one of the two items, by turn-
ing 5, 20, 22 or 25, then press 5, 20
or 22 on the steering column control;
– turn 5, 20, 22 or 25 left or right to
raise or lower the volume, then con-
firm by pressing 5;
To activate the ringtone on the vehi-
cle or the phone via Bluetooth®, select
"Ringtones" by turning 5, 20, 22 or 25
and pressing 5, 20 or 22 on the steering
column control.
A new sub-menu appears:
– "Car";
– "Phone";
– select one of the two items to be ac-
tivated by turning 5 and then press 5.
Note: for a phone paired to the audio
system, a new item appears in the
menu: "BT settings":
– "Update phonebook": updating of
the phonebook of the phone paired
to the audio system (e.g. addition of
new contacts not yet in the system).
– to update the phonebook on the
audio system, access the "BT set-
tings" menu by pressing 10, then
select "Update phonebook" by
pressing 5, 20 or 22 on the steering
column control.
Display of radio texts
Display the radio text menu by press-
ing 14. Select "Radio", then press 5, 20
or 22 on the steering column control.
The radio texts display may contain a
maximum of 64 characters.
NB: if there is no information provided,
the screen displays "No message".
For safety reasons, carry
out any adjustments when
the vehicle is stationary.

Publicité

Chapitres

Table des Matières
loading

Table des Matières