JVC Exad KW-AVX820 Manuel D'instructions page 65

Symptom
• Disc cannot be played back.
• Noise is generated.
• Tracks are not played back as you
have intended them to play.
• Elapsed playing time is not correct.
• "Not Support" appears on the screen
and track skips.
• Noise is generated.
• Tracks cannot play back as you have
intended them to play.
• "Now Reading..." keeps flashing on
the screen.
• Correct characters are not displayed
(e.g. album name).
• While playing a track, sound is
sometimes interrupted.
• Bluetooth device does not detect the
unit.
• The unit does not make pairing with
the Bluetooth device.
Remedy/Cause
• Change the disc.
• Record the tracks using a compliant application on the
appropriate discs. (
• Add appropriate extension codes to the file names.
The track played back is not a playable file format. Skip to
another file.
Playback order may differ from the one played back using other
players.
This sometimes occurs during playback. This is caused by how
the tracks are recorded.
The track is unplayable.
The track played back is not a playable file format. Skip to
another file.
Playback order may differ from the one played back using other
players.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy and folders.
• Turn off the power and on again.
For available characters,
The tracks are not properly copied into the USB device. Copy
tracks again, and try again.
• Search from the Bluetooth device again.
• Reset the unit. When "Open..." appears on the monitor,
search from the Bluetooth device again.
Enter the same PIN code for both the unit and target device. If
the PIN code of the device is not indicated on its instructions,
try "0000" or "1234."
4)
59.
Continued on the next page
REFERENCES 65