JVC Exad KW-AVX820 Manuel D'instructions page 26

Menu item
Phone Connect*
Audio Connect*
Phone Disconnect*
Audio Disconnect*
Delete Pairing
New Pairing
* 5
When a device has already been connected to the unit, <Phone Connect> and <Audio Connect> do not appear
and vice versa.
* 6
Some devices have their own PIN code. Enter the specified PIN code to the unit.
26
5
/ Only for the registered devices.
5
Select a device from among the registered devices, establish the connection
with it.
5
/ Only for the device being connected.
5
Disconnect the current device before connecting another device.
Only for the registered devices.
Press [Yes] to confirm deleting the registered devices.
Preparation:
• Operate the Bluetooth device to turn on its Bluetooth function.
1
Press [Enter].
2
Enter a PIN (Personal Identification Number) *
• You can enter any number you like (1-digit to 16-digit number).
PIN Code
Back Back
3
Operate the Bluetooth device to connect while "Open..." is displayed on
the screen.
Enter the same PIN code (as entered in the above step) on the device to
be connected.
Now connection is established and you can use the device through the unit.
• The device remains registered even after you disconnect the device. Use
<Phone Connect>/<Audio Connect> (or activate <Auto Connect>,
27) to connect the same device from next time.
Selectable setting/item
[BS]
[Del] : Erases the character
[Enter] : Confirms the entry.
6
.
: Erases the character
before the cursor.
on the cursor.