Accessories; Service And Repair - Leister BITUMAT B2 Instructions D'utilisation

Accessories

Only Leister accessories should be used
139.048 Bitumen nozzle 75 mm
138.047 Bitumen-nozzle 100 mm
137.895 Pressure roller with gap 100 mm
137.896 Pressure roller with gap 75 mm
140.229 Pressure roller without gap100 mm
140.228 Pressure roller without gap 75 mm
140.476 Lifting device
140.489 Carrying case
Training
• Leister Technologies AG and its authorised Service Centres offer free welding courses and training.
Informationen below www.leister.com.
Maintenance
• Clean the drive roller (13)
• Clean the welding nozzle (7) with a steel brush (31)
• Clean the air inlet on the hot air blower (8)
• Check power supply cord (1) and plug for electrical and mechanical damage

Service and repair

• Regular service of the hot air welder BITUMAT B2 increases its service life!.
• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and relia-
ble repair service within 24 hours, using original spare parts in accordance with the circuit diagrams and
spare parts lists.
Warranty
• For this tool, we generally provide a warranty of one (1) year from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will be corrected by replacement or repair. Heating elements are
excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
26