Dolby Digital - Sony BRAVIA KDL-22PX300 Mode D'emploi

Masquer les pouces Voir aussi pour BRAVIA KDL-22PX300:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Setting sound options
Audio Digital Out
You can switch the method of outputting the audio signal when you
connect the following audio devices to the DIGITAL OUT (OPTICAL)
connector.
Caution
When the built-in PlayStation
2 is connected to an audio device without a
TM
Dolby Digital, DTS or MPEG decoder, set "Dolby Digital", "DTS" and
"MPEG" to "Off". If you set these options to "On" without the necessary
decoder, you may have no sound or an extremely loud noise may be emitted.
Digital Out (Optical)
This option sets the type of output for the DIGITAL OUT (OPTICAL)
connector.
On
Select this option when you want sound (audio signal) to be output
through the DIGITAL OUT (OPTICAL) connector.
Settings for "Dolby Digital", "DTS" and "MPEG" are displayed.
Off
Select this option when you do not want sound to be output through the
DIGITAL OUT (OPTICAL) connector.
Settings for "Dolby Digital", "DTS" and "MPEG" are not displayed.

Dolby Digital

This option sets Dolby Digital as the output signal for the DIGITAL OUT
(OPTICAL) connector.
On
Select this option when the built-in PlayStation
audio device with a built-in Dolby Digital decoder.
Off
Select this option when the built-in PlayStation
audio device without a built-in Dolby Digital decoder.
DTS
This option sets DTS as the output signal for the DIGITAL OUT
(OPTICAL) connector.
On
Select this option when the built-in PlayStation
audio device with a built-in DTS decoder.
Off
Select this option when the built-in PlayStation
audio device without a built-in DTS decoder.
MPEG
This option sets MPEG AUDIO as the output signal for the DIGITAL
OUT (OPTICAL) connector.
On
Select this option when the built-in PlayStation
audio device with a built-in MPEG decoder.
Off
Select this option when the built-in PlayStation
audio device without a built-in MPEG decoder.
2 is connected to an
TM
2 is connected to an
TM
GB
2 is connected to an
TM
2 is connected to an
TM
2 is connected to an
TM
2 is connected to an
TM
Adjusting DVD player settings
25

Publicité

Table des Matières
loading

Table des Matières