Removing The Refrigerator Doors; Tools You'll Need - Samsung RS25H5121 Serie Mode D'emploi

How to install the handles
Orient each handle so that the end with the sticker
attached is at the top and the holes with the
tightening screws are facing each other.
Then, follow the directions below to install each
handle.
By using Phillips screwdriver, fix the screw
(optional) and then put he handle on the fixer by
sliding them down firmly.
L
( 2 )
By using L- wrench, fix the screw with the longer
part of it and then fully tighten up with the shorter
part.
( 4 )
L
DA68-02981E-10.indb 11
( 1 )
( 3 )
Fix the handles to the doors
by sliding them down firmly.
( 5 )
S
English - 11
REMOVING THE REFRIGERATOR
DOORS
If your entrance won't allow the refrigerator to pass
easily through it, you can remove the refrigerator
doors.
To remove the doors, follow the steps below.
If you do not need to remove the doors, go to
"Leveling the Refrigerator" on page 15.

Tools You'll Need

Philips Flat-blade
Screwdriver Screwdriver
1. Remove the Front Leg Cover
Open both the freezer and refrigerator doors.
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
CAUTION
When disassembling make sure the unit is turned
off.
10 mm Socket
Wrench
Front leg cover
Screw
2018. 7. 4. 1:52