USING THE CONTROL PANEL
Freezer/Fridge
(Temperature adjustment)
Press the Freezer or Fridge button repeatedly until
the desired temperature is set.
Each time you press the Freezer or Fridge button,
the temperature indicator will change in the order
shown below.
• Freezer
0 °F → -1 °F → -2 °F → -3 °F → -4 °F → -5 °F →
-6 °F → -7 °F → -8 °F → 5 °F → 4 °F → 3 °F →
2 °F → 1 °F → 0 °F
(-18 °C → -19 °C → -20 °C → -21 °C → -22 °C →
-23 °C → -15 °C → -16 °C → -17 °C → -18 °C)
❈ In some areas, the temperature sequence starts
at -2 °F (-19 °C) .
• Fridge
37 °F → 36 °F → 35 °F → 34 °F → 44 °F → 43 °F
→ 42 °F → 41 °F → 40 °F → 39 °F → 38 °F →
37 °F
(3 °C → 2 °C → 1 °C → 7 °C → 6 °C → 5 °C →
4 °C → 3 °C)
Power Freeze
This icon lights when you activate the Power
Freeze function.
Power Freeze generates cold air for up to 50 hours
continuously, chilling the freezer more quickly.
This function is useful when you need to decrease
the temperature in the freezer quickly or to make
more ice rapidly.
When you have enough, just press and hold the
Freezer/Power Freeze (3 sec) button again for 3
seconds to cancel the Power Freeze function.
When you use this function, energy
consumption of the refrigerator may
increase.
Remember to turn Power Freeze off when
you do not need it and return the freezer
to your original temperature setting.
DA68-02981E-10.indb 20
Energy Saver
This icon lights when you activate the Energy
Saver function.
The Energy Saver function is automatically set to
"ON" when power is supplied to the Refrigerator.
If condensation occurs on the doors, turn the
Energy Saver function off.
Lighting
This icon lights when you activate the Lighting
function.
When the icon is lit, the dispenser light (under the
display) is on continuously.
If you want the Dispenser lamp to come on only
when some one uses the dispenser, press the
Lighting button to turn the continuous mode off.
Control Lock
This icon lights when you activate the Lock
function.
When the Control Lock icon is lit, all the panel
buttons, including the Ice button and the
dispensers, are locked and de-activated.
Press and hold the Lighting/Control Lock button
for 3 seconds to turn Control Lock off and re-
activate the panel buttons.
Filter Indicator
This icon turns red when you need to change the
filter, usually after the refrigerator has dispensed
about 300 gallons of water (or after about 6
months). The icon will blink red for several seconds
when you open or close the door.
The filter Indicator will be Off when you initially
insert the water filter.
English - 20
2018. 7. 4.
1:52