Conversion Instructions; Items Required - Rinnai COMBI i060C Manuel

Masquer les pouces Voir aussi pour COMBI i060C:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4

Conversion Instructions

WARNING
CAUTION
CAUTION
CAUTION
IMPORTANT
Before you get started, confirm that the inlet gas pressure is between the minimum and maximum pressures
allowed for this boiler.
If subsequent conversions are made, then a new conversion label must be placed on the boiler to accurately
reflect the gas type.

1. Items Required

The following items are supplied with the conversion kit:
ORIFICE
Additional item required:
Phillips Head Screwdriver
Rinnai I-Series Boiler Conversion Manual
Failure to correctly assemble the components according to these instructions may result in
a gas leak or explosion.
The gas supply shall be shut off prior to disconnecting the electrical power, before
proceeding with the conversion.
Do not touch any other areas on the PC board other than the described buttons while
power is supplied to the appliance. Parts of the PC board are supplied with 120 volts
AC.
Do not touch the areas at or near the heat exchanger or hot water lines. These areas
become very hot and could cause burns.
OUTER GASKET
INNER GASKET
CONVERSION
RATING PLATE
CONVERSION
MANUAL
This Manual
5

Publicité

Chapitres

Table des Matières
loading

Table des Matières