Introduction; Safety Symbols - Rinnai COMBI i060C Manuel

1

Introduction

This manual provides instructions for converting gas
types on Rinnai I-Series Condensing Boilers.
For installations in Canada, the conversion shall be
carried out in accordance with the requirements of the
provincial authorities having jurisdiction and in
accordance with the requirements of the CGA-B149.1,
Natural Gas and Propane Installation Code.
The boiler must be converted in accordance with local
codes or, in the absence of local codes, the National Fuel
Gas Code, ANSI Z223.1/NFPA 54 and/or CSA B149.1,
Natural Gas and Propane Installation Code.
To The Consumer
•
Keep this manual for future reference.
•
See the Safety Precautions section in this
manual for detailed safety precautions.
•
Be sure the boiler conversion is performed by a
trained and qualified professional.
2

Safety Symbols

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
DANGER
WARNING
CAUTION
Rinnai I-Series Boiler Conversion Manual
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in
minor or moderate injury. It may also be used to alert against unsafe practices.
To The Installer
•
A trained and qualified professional must
perform the gas conversion for this boiler.
Improper gas conversion will void the warranty.
•
The trained and qualified professional should
have skills such as:
−
Gas line sizing
−
Connecting gas lines, water lines, valves,
and electricity
−
Knowledge of applicable national, state, and
local codes
−
Training in installation of condensing
boilers. Training on Rinnai I-Series
Condensing Boilers is accessible at
www.trainingevents.rinnai.us.
•
Read all instructions in this manual before
attempting the gas conversion. The gas
conversion must be performed according to the
exact instructions in this manual.
•
Proper gas conversion is the responsibility of
the installer.
•
When gas conversion is complete:
−
Complete the "For the Consumer" form in
the back of this manual.
−
Leave this manual with the boiler or give
the manual directly to the consumer.
3