Ignition; Cookware - Samsung NY58J9850WS Manuel D'utilisation

Masquer les pouces Voir aussi pour NY58J9850WS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cooktop

Ignition

2
1
Manual ignition
If there is a power failure, you can ignite the burner manually. Use caution when
doing this.
Hold a long gas grill lighter to the surface burner you want to light.
1.
2.
Push in the control knob for that burner, and then turn it to the LITE position.
Turn on the grill lighter to ignite the burner.
3.
After the burner is lit, turn the control knob to adjust the flame level.
Flame level
The flames on the burners should always stay under the cookware, and should not
extend beyond the cookware bottom at any time.
WARNING
Flames larger than the cookware bottom may result in a fire or physical injury.
When you set a burner to simmer, do not turn the burner knob quickly. Watch
the flame to make sure it stays on.
After turning on a surface burner, check to make sure that the burner has
ignited. Adjust the level of the flame by turning the burner knob.
Always turn off the surface burner controls before removing cookware. All
surface burner controls should be turned OFF when you are not cooking.
16 English
Make sure all surface burners are properly
installed. To light a burner:
1.
Push in the control knob, and then
turn it to the LITE position. You will
hear a "clicking" sound indicating the
electronic ignition system is working
properly.
2.
After the surface burner lights, turn the
control knob to shift it out of the LITE
position and turn off the electronic
ignition system.
3.
Turn the control knob to adjust the
flame level.
Always turn the burners off before you go to sleep or go out.
If you smell gas, turn off the gas to the range and call a qualified service
technician. NEVER use an open flame to locate a leak.

Cookware

Requirements
Flat bottom and straight sides
Tight-fitting lid
Well-balanced with the handle weighing less than the main portion of the pot
or pan.
Material characteristics
Aluminum: An excellent heat conductor. Some types of food may cause the
aluminum to darken. However, anodized aluminum cookware resists staining
and pitting.
Copper: An excellent heat conductor but discolors easily.
Stainless steel: A slow heat conductor with uneven cooking performance but is
durable, easy to clean, and resists staining.
Cast-Iron: A poor conductor but retains heat very well.
Enamelware: Heating characteristics depend on the base material.
Glass: A slow heat conductor. Use only glass cookware that is specified for top-
of-range cooking or oven use.
Size limitations
CAUTION
Do not place a small pan or pot with a
bottom diameter of about 6 inches or
less on the center grate. This cookware
may tip over. Use the rear burners for
this small-sized cookware.
* : 6 inches or less

Publicité

Table des Matières
loading

Table des Matières