Samsung NY58J9850WS Manuel D'utilisation page 44

Masquer les pouces Voir aussi pour NY58J9850WS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Maintenance
CAUTION
The starter electrodes are not removable. Do not attempt to remove them by
force.
To avoid chipping, do not bang grates and caps against each other or hard
surfaces such as cast iron cookware.
The burner spreader can be blocked by food or dust. Clean the spreader if it
appears blocked. If you clean the spreader with water, assemble it only after
it is completely dry. If the spreader is wet, it might prevent the burners from
igniting.
44 English
Burner reinstall guide
Dual Burner head
1.
Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2.
Install the burner head so that the
electrode passes through the opening
for the electrode. Make sure the burner
head lies flat on the stove top.
Round Burner head
1.
Orient the burner head so that the
opening for the electrode lines up with
the electrode.
2.
Install the burner head so that the
electrode passes through the opening
for the electrode. Make sure the burner
head lies flat on the stove top.

Publicité

Table des Matières
loading

Table des Matières