Non-Cooking Functions - Samsung NY58J9850WS Manuel D'utilisation

Electric oven

Non-Cooking Functions

Temperature adjust
The oven temperature has been calibrated at the factory. When first using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
4
1
1 2
3
Temp. Unit (°F / °C)
Change the temperature format of the oven to Fahrenheit or Centigrade. The
default is Fahrenheit.
3
2 2 1
1
38 English
1. Press the Options button, and then
2 on the number pad.
2. Press the Options button to select a
higher (+) or lower (-) temperature.
3. Enter an adjusting temperature value
(0-35) using the number pad.
4. Press the START/SET button to save the
changes.
NOTE
• This adjustment does not affect
the broiling or the self-cleaning
temperature, and is retained in memory
after a power failure.
Press the Options button, and then
1.
3 on the number pad.
2. Press 1 (Fahrenheit) or 2 (Celsius) on
the number pad.
3. Press the START/SET button to save the
changes.
Auto Conversion
Auto Conversion automatically converts regular baking temperatures to convection
baking temperatures. For example, if you enter a regular recipe temperature of
350 °F and press START/SET, the oven displays the converted temperature of
325 °F.
3
2 2
1
1
Time/date (12hr / 24hr)
Set the clock to display the time in the 12-hour or 24-hour format.
3
2 2
1
1
Energy saving
This will automatically turn off the oven 12 hours after baking starts or 3 hours
after broiling starts.
3
2 2
1
1
1. Press the Options button, and then
4 on the number pad.
2. Press 1 (Off) or 2 (On) on the number
pad. (Default setting is "Off".)
3. Press the START/SET button to save the
changes.
1. Press the Options button, and then
5 on the number pad.
2. Press 1 (12hr) or 2 (24hr) on the
number pad. (Default setting is
"12-hour".)
3. Press the START/SET button to save the
changes.
Press the Options button, and then
1.
6 on the number pad.
2. Press 1 (Off) or 2 (On) on the number
pad.
3. Press the START/SET button to save the
changes.