VINCENT CD-S3 Manuel D'utilisation page 28

10
10. AUDIO OUTPUTS:
analogue audio signal outputs
Either the RCA connectors or the XLR sockets are
connected to the relevant input of the amplifier,
preamplifier etc. It is not necessary to also con-
nect one of the digital signal outputs (11).
11. DIGITAL OUTPUTS:
digital audio signal outputs
If the amplifier, receiver or preamplifier is equip-
ped with a digital coaxial or optical digital input
connector, the relevant CD player signal output
may be connected to this. It is not necessary to
connect an analogue (10) and a digital signal
output (11) at the same time.
Vincent
2 2 8 8
REAR VIEW
11
12. AC power connector and fuse holder
To establish the power supply, connect the plugs
of the power cable to the device and to a 230V
AC wall outlet. The small plastic housing beneath
the plug opening holds the fuse. Refer to the secu-
rity precautions.
12