Using The Appliance - Cuisinart Turbo Vapeur TCS60E Mode D'emploi

1. FEATURES
1. Turbo Convention Fan: this exclusive system to circulate steam
allows to cook foods rapidly and in a uniform way, without
having to turn them over during the cooking process.
2. Large capacity: the 6-liter container allows you to prepare a
complete meal in one go.
3. 2 cooking trays: to prepare large quantities or separate well
the foods while steaming
4. Starches bowl of 1.2 litre.
5. Detachable transparent water tank for greater user-friendliness.
Capacity of 1.2 litre, easily to detach and to fill.
6. 60 minute timer with automatic stop. Easy to adjust, it produces
a tone when cooking is completed.
Turbo Convection Fan
Lid
Cooking tray
Starches bowl
Cooking tray
Transparent removable tank
Base
Timer
2. INTRODUCTION
You have just bought a Turbo Steam steamer from Cuisinart®. This
appliance is a quality tool that will allow you to realize all kinds of
preparations rapidly and very easily.
Steam cooking is very healthy as it does not necessitate the use of fat
and preserves the flavour and properties of the foods. Thanks to the
convection system, the air is distributed uniformly, allowing quicker
steaming, without having to mix or turn over the foods during
the cooking process. The large capacity bowl allows to prepare a
complete meal in only one go.
All dishes are henceforth within your reach!

3. USING THE APPLIANCE

A. Assembly and use
1. Place the base of the appliance on a flat surface. Avoid installation
under a piece of furniture as steam might damage it. Now place
the larger tray on the base and then the foods in it (see also the
steaming guide on page 9). If you wish to use the second tray,
place it above the first one and fill it. It should be supported by the
lip of the plate and the handles should be lined up.
N.B. the large tray should always be placed on the base in the first
place. Do not place the small tray directly on the base.
2. To remove the water tank, pull it upwards. Turn it over and unscrew
the stopper. Fill the tank with water, place the stopper and replace
the tank.
3. Place the lid on the tray, then the fan above it. Make sure the fan
is well pushed in the lid and the lugs are correctly placed at the
back. Press slightly to place the fan correctly.
4. Plug in the appliance. It is now ready for use.
B. Using the starches bowl
1. To cook starches that absorb cooking water, such as rice, add
water directly in the bowl, with the starches. Once filled, the
starches bowl is placed in the large tray. For the water volume
to be added, refer to the cooking guide on page 9.
2. Place lid and fan and connect the appliance.
Do not use the appliance without its lid.
IMPORTANT: throughout the use, do not touch the base, trays or lid
in order to avoid any risk of burn.
7