Listening To The Dab; Selecting A Service; Alphabet Search For Service; Updating Service List Information - Kenwood KDC-DAB41U Mode D'emploi

Listening to the DAB

Hold to turn on or off the Traffic Information function.
■
Changes to DAB source if other than
DAB source has been selected.
■
Press briefly to enter DAB service
search mode
■
Updates DAB search list information
or stops update if pressed and held.
Press SRC to select "DAB".
1
Press BAND repeatedly to select a band
2
(DB1, DB2, DB3).
Press and hold 4 / ¢ to search for an
3
ensemble.
Press 4 / ¢ to select an ensemble,
4
service or component to listen.
Press ¢ to receive ensemble, then select
■
service > component in sequence. When
4 is pressed, primary service is selected
when ensemble changes and primary is
selected when service changes.
: Press 4.
: Press ¢.

Selecting a service

• The service list information must be obtained
first.
Press DAB to enter Service Search mode.
1
"SERVICE LIST" appears.
8
English
LIST
UPDATE
Ensemble Ensemble
Service Service
Primary Primary
Secondary Secondary
Service Service
Service Service
■
Hold for about 2 seconds to memorize the current
service or the selected Program Type. (Refer to [PTY
SEARCH] on the table below to select the Program
Type.)
■
Press briefly to recall memorized service (or Program
Type after entering the PTY search mode).
Turn the volume knob to select a service,
2
then press to confirm.
To skips character, press 4/ ¢.
■
■
To cancel the Service Search mode, press
and hold
■
"NO LIST" is displayed when no service list
is obtained.

Alphabet Search for service

Press DAB to enter Service Search mode.
1
"SERVICE LIST" appears.
Press
2
"< ABCDEFG >" appears.
Turn the volume knob to select the
3
character to be searched for.
■
To move to the next row, press BAND.
To skips character, press 4/ ¢.
■
Press the volume knob to start searching.
4
■ To return to the Service Search mode, press
.
■
To cancel the Service Search mode, press
and hold
■
To search for a character other than A to Z
and 0 to 9, enter only " * ".

Updating Service List information

Press and hold DAB to start Service list
update.
.
to enter alphabet search mode.
.