Commissioning; Safety Information; Delivery Scope And Transport Inspection; Unpacking - CASO DESIGN PJ 1000 Mode D'emploi

Danger
► Do not operate this device if it has a damaged cable or
plug, if it is not working properly or if it has been damaged
or dropped. If the power cable or plug are damaged, then
they must be replaced by the manufacturer or its service
agent in order to avoid a hazard.
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if
live connections are touched and the electrical or
mechanical structure is altered. In addition, functional
faults on the device can also occur.

12.4 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

12.5 Safety information

Warning
► Packaging materials may not be used for playing. There is a danger of suffocation.

12.6 Delivery scope and transport inspection

As a rule, the PJ 1000 is delivered with the following components:
 Pushing bar
 Middle ring
 Main machine
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

12.7 Unpacking

To unpack the device, proceed as follows:
 Remove the device out of the carton and remove the packaging material.
 Transparent cover
 Handle
 Juice jug
Please note
 Juicing net
 Residue barrel
 Operating Instructions
26