Limitation Of Liability; Copyright Protection; Commissioning; Safety Information - CASO DESIGN SJW 500 Mode D'emploi

12.5 Limitation of liability

All the technical information, data and notices with regard to the installation, operation and
care are completely up-to-date at the time of printing and are compiled to the best of our
knowledge and belief, taking our past experience and findings into consideration.
No claims can be derived from the information provided, the illustrations or descriptions in
this manual. The manufacturer does not assume any liability for damages arising as a
result of the following:
 Non-observance of the manual
 Improper repairs
 Technical alterations, modifications of the device
Modifications of the device are not recommended and are not covered by the guarantee.
All translations are carried out to the best of our knowledge. We do not assume any liability
for translation errors, not even if the translation was carried out by us or on our
instructions. The original German text remains solely binding.

12.6 Copyright protection

This document is copyright protected. Braukmann GmbH reserves all the rights, including
those for photomechanical reproduction, duplication and distribution using special
processes (e.g. data processing, data carriers, data networks), even partially.
Subject to content and technical changes.

13 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

13.1 Safety information

Warning
► Packaging materials may not be used for playing. There is a danger of suffocation.

13.2 Delivery scope and transport inspection

As a rule, the SJW 500 is delivered with the following components:
 feeding tube
 middle part
 residue container and juice container
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

13.3 Unpacking

To unpack the device, proceed as follows:
Remove the device out of the carton and remove the packaging material.
 pusher  pressure auger
 juicing strainer
 Uses for non-intended purposes
 Use of unauthorized spare parts
 sorbet strainer
 cleaning brush
 wiper basket
 motor unit
 operation manual
33