Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operational guide
Power on
1. Connect the power adapter to the speaker and then connect to the wall socket.
2. The indicator light on the front panel is now lit, the system is on. Press & hold the
approximately 3 seconds to put the system into standby mode. Press the
back on.
AUX input
1. Connect the AUX input cable to your PC sound card, MP3 player or external audio source using the
3.5mm to 3.5mm audio connecting cable.
2. Play the selected audio on the connected device.
3. Adjust the volume to the desired level.
5
English
button for
button to turn the system
Power output:
RMS 8W × 2 + 10W × 2 (DRC on)
Signal to noise ratio:
≥85dBA
Frequency response:
56Hz~17KHz (±6dB)
Input type:
AUX
Input sensitivity:
R/L: 700 mV ± 50mV
SW: 350 mV ± 50mV
Adjustment:
Buttons on active speaker
Bass unit:
3 inch (82mm), magnetically shielded, 6 ohm
Treble unit:
1½ inch (40mm), magnetically shielded, 8 ohm
Dimension:
105(W) × 310(H) ×180(D) mm
Net Weight:
Approx. 2.4 kg
Gross Weight:
Approx. 3.0 kg
Specifications
6
English
Publicité
Table des Matières
