Marshalltown MTVR95 Mode D'emploi page 9

Notes
1. This manual refers to WPC, SPC, Rigid-Core, and Luxury Vinyl Plank as "vinyl plank"
regardless of the flavor.
2. "Duck-Billed" or other wide-faced pliers make gripping vinyl plank easier for snapping,
especially when a strip narrower than 2" is needed.
Step 1 – Retract blade by turning depth knob
(A) counterclockwise. You can stop when blade
is fully retracted into the receiver. Continue to
rotate knob if you would like to remove it
completely.
Step 3 – Slide guide fence (B) to the widest
position.
WS2459
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
PRODUCT OPERATION
Step 2 - Unlock guide fence (B) by lifting latch
lever (C).
Step 4 - Place the MARSHALLTOWN® Vinyl
Ripper over a vinyl plank.
a. Set the vinyl plank onto the handle side
runner.
9 of 16