Changing The Blade - Marshalltown MTVR95 Mode D'emploi

!
Step 1 – Extend Blade Cartridge by turning the
Handle Knob clockwise until it stops. Do not
force the knob further.
Step 3 – Slide the Blade and Spacers out of
the Blade Cartridge.
12 of 16
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com

CHANGING THE BLADE

BLADE IS EXTREMELY SHARP.
USE CUT RESISTANT GLOVES WHEN CHANGING THE BLADE.
WARNING
Step 2 - Use a screwdriver or pen to push the
Axle Pin out of the Blade Cartridge.
Step 4 - Discard the old Blade and place a new
one into the Axle Pin with a Spacer on either
side of the Blade.
!
WS2459