Transport And Storage; Packaging And Disposal - hymer 8473 Instructions De Montage Et D'utilisation

platform may not be damaged or corroded.
Check welding seams for cracks.
Check castors, wheels and crossbeams for proper functioning.
Brakes must be checked for proper functioning.

13. Transport and storage

WARNING!
Risk of injury.
To avoid any damage and accidents, make sure that the product is
properly secured during transport (e.g. on roof racks or in the car).
stored (e.g. ropes or access hatches).
The product must be stored in a clean, dry place and protected from
the weather.
It may not be stored in places that may damage its condition (e.g.
humidity, high temperatures, weather conditions).
It may not be stored in places where it can be damaged by vehicles,
heavy objects or dirt.
It must be stored in such a way that it does not cause a tripping
hazard and does not obstruct anyone.

14. Packaging and disposal

The packaging must be disposed of in accordance with the applica-
ble regulations and laws.
2021-08 0095853 8473 TNR
Do not use the product if any of the items listed above are not in
order.
It must be stored in a position that helps to keep it straight (e.g.
surface).
It must be stored in such a way that it cannot easily be used for
criminal purposes.
If the product is permanently installed, ensure that it is not used by
unauthorised persons (e.g. children).
Products made of or containing plastics should be stored away from
direct sunlight.
Products made of wood or containing wood should be stored in a
dry place and may not be covered with opaque and vapour-proof
coatings.
The product must be disposed of in accordance with the legal and
(Errors and technical changes reserved.)
17
EN 1004-2 – en