hymer 8473 Instructions De Montage Et D'utilisation page 12

2.2 Symbols according to EN 1004
Read the assembly and use instructions carefully
and keep in a safe place.
Do not assemble or use at wind speeds of over
12 m/s (Beaufort Scale 6).
The product must be aligned vertically by means of
levelling spindles (if available).
Only access the platforms from the inside of the
product.
Do not lift the product using any mechanical or
electrical equipment.
Do not suspend the product from a crane or similar
equipment.
Do not attach or use lifting devices, building hoists
or similar.
Do not use the platform as the base for other climb-
ing aids or for any work that is conducted above the
12
EN 1004-2 – en
The vertical distance between:
Do not stand on an unsecured platform. Fit side
protection before accessing the platform.
Use temporary guardrails or
carry out assembly in seated position from the
access hatch.
Do not climb up the outside of the product or at
points not intended for this purpose.
Do not use the product as a means to access other
surfaces (e.g. stair tower, building, etc.).
Do not use the product for the purpose of accessing
other similar products or other structures.
Remove objects or persons from the product before
moving it to another location.
Only move the product in longitudinal or diagonal
direction by hand at walking speed.
2021-08 0095853 8473 TNR