Setting Engine Speed - Honda GXV160 Manuel De L'utilisateur

3. FLYWHEEL BRAKE types:
Move the flywheel brake lever to the RELEASED position.
The engine switch, which is linked with the flywheel brake lever, is
turned on when the flywheel brake lever is moved to the RELEASED
position.
4. Pull the starter grip lightly until you feel resistance, then pull briskly in
the direction of the arrow as shown below. Return the starter grip
gently.
Direction to pull
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter.
5. If the control lever was moved to the CHOKE position to start the
engine, gradually move it to the MAX. or MIN. position as the engine
warms up.
CONTROL LEVER
CHOKE ROD types:
If the choke rod was moved to the CLOSED position to start the engine,
gradually move it to the OPEN position as the engine warms up.
CHOKE ROD
The control lever shown here will be connected to a remote control on
the equipment powered by this engine. Refer to the instructions
provided by the equipment manufacturer.
ENGAGED
RELEASED
FLYWHEEL BRAKE LEVER
STARTER GRIP
MIN. MAX.
CHOKE
OPEN
6. FLYWHEEL BRAKE types: Continue to hold the flywheel brake lever in
the RELEASED position. The engine will stop if you move the flywheel
brake lever to the ENGAGED position.

SETTING ENGINE SPEED

Position the control lever for the desired engine speed.
CONTROL LEVER
The control lever shown here will be connected to a remote control on
the equipment powered by this engine. Refer to the instructions
provided by the equipment manufacturer for remote control information
and engine speed recommendations.
ENGLISH
MIN.
MAX.
5