Component & Control Locations; Before Operation Checks; Is Your Engine Ready To Go - Honda GXV160 Manuel De L'utilisateur

COMPONENT & CONTROL LOCATIONS
FUEL FILLER CAP
FUEL TANK
OIL DRAIN PLUG
STARTER GRIP
SPARK PLUG
ENGINE CONTROLS
FUEL VALVE LEVER
OIL FILLER CAP/DIPSTICK OIL FILLER CAP/DIPSTICK
MUFFLER
FLYWHEEL BRAKE LEVER
(applicable types)
RECOIL STARTER
AIR CLEANER
CONTROL LEVER

BEFORE OPERATION CHECKS

IS YOUR ENGINE READY TO GO?

For your safety, to ensure compliance with environmental regulations,
and to maximize the service life of your equipment, it is very important to
take a few moments before you operate the engine to check its
condition. Be sure to take care of any problem you find, or have your
servicing dealer correct it, before you operate the engine.
Failure to properly maintain this engine, or failing to correct
a problem before operation, could result in a significant
malfunction.
Some malfunctions can cause seriously injuries or death.
Always perform a pre-operation inspection before each
operation, and correct any problem.
Before beginning your pre-operation checks, be sure the engine is level
and the engine switch is in the OFF position.
Always check the following items before you start the engine:
Check the General Condition of the Engine
1. Look around and underneath the engine for signs of oil or gasoline
leaks.
2. Remove any excessive dirt or debris, especially around the muffler
and recoil starter.
3. Look for signs of damage.
4. Check that all shields and covers are in place, and all nuts, bolts, and
screws are tightened.
Check the Engine
1. Check the fuel level (see page 8). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.
2. Check the engine oil level (see page 8). Running the engine with a
low oil level can cause engine damage.
3. Check the air filter element (see page 9). A dirty air filter element will
restrict air flow to the carburetor, reducing engine performance.
4. Check the equipment powered by this engine.
Review the instructions provided with the equipment powered by
this engine for any precautions and procedures that should be
followed before engine startup.
ENGLISH
3