Skil 2860 Consignes De Fonctionnement/Sécurité page 13

SM 1619X08572 04-13_SM 1619X08572 04-13.qxp 4/17/13 1:22 PM Page 13
When you begin the charging process of the
battery pack, a steady green light could also
mean the battery pack is too hot or too cold.
The purpose of the light is to indicate that the
battery pack is fast-charging. It does not
indicate the exact point of full charge. The light
* BUTTON
* B TTERY
CH RGE
CONDITION
INDIC TOR
LIGHTS
Place battery pack and charger on flat non-flammable surfaces and away
W RNING
from flammable materials when re-charging battery pack.
Plug charger cord into your standard power
outlet, then slide battery pack into charger
(Fig. 4). The charger's green light will turn
"ON". The green light remains ''ON'' for
approximately 5-6 hours after the battery pack
is connected.
After normal usage, the battery pack requires
approximately 4-6 hours or less charging
FIG. 4
CH RGER
* NOT AVAILABLE ON ALL MODELS
CHARGING BATTERy PACK (SC118C CHARGER)
INDIC TOR LIGHT
B TTERY P CK
will stop blinking in less time if the battery pack
was not completely discharged.
When the battery pack is fully charged, unplug
the charger (unless you're charging another
battery pack) and slip the battery pack back
into the tool handle.
B TTERY
P CK
time to become fully charged. If the battery
pack is run-down completely, it may require
up to 6 hours charging time to become fully
charged.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slide the battery
pack back into the tool handle.
-13-
FIG. 3
CH RGER
INDIC TOR LIGHT