Preoperational Inspection Checklist - Little Giant Climb On M13 Consignes De Fonctionnement/Sécurité

HERE AT LITTLE GIANT, OUR MISSION IS
YOUR SAFETY IS OUR TOP PRIORITY!
FOR YOUR SAFETY, GO THROUGH THE FOLLOWING INSPECTION
NEVER CLIMB A DAMAGED, BENT, OR BROKEN LADDER!
PREOPERATIONAL LADDER INSPECTION CHECKLIST
There are no missing parts, and all rivets and/or fasteners are
tight and secure.
The rungs and rails are in good condition with no cracks,
twists, bends or large dents.
All four feet sit flat on a level floor with the ladder in the
stepladder position, and the ladder does not wobble.
The feet are all present and in good condition, and the tread is
not worn through.
The hinge locks function properly, and fully lock into the
storage, stepladder, and straight ladder modes.
The outer ladder locks function properly, and fully lock into the
inner rungs.
The outer ladder assemblies slide smoothly along the inner
ladder assembly.
All safety labels are present and legible.
If applicable, any other additional components, such as
RATCHET™ levelers, function and lock properly.
IF YOU ENCOUNTER ANY ISSUES DURING THE INSPECTION, REMOVE
THE LADDER FROM SERVICE UNTIL THE NECESSARY REPAIRS HAVE
BEEN MADE. PLEASE CONTACT OUR CUSTOMER EXPERIENCE TEAM
AT 800-453-1192
INFORMATION. DESTROY THE LADDER IF IT CANNOT BE REPAIRED.
CHECKLIST BEFORE EACH USE.
FOR REPLACEMENT PART AND WARRANTY
EN
21