auna IR-120 Mode D'emploi page 20

Radio internet, lecteur upnp et dlna
Masquer les pouces Voir aussi pour IR-120:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

You will now need to connect your Internet radio to Windows Media Player 11 and configure it to allow the radio to
access your media library. In order to this, you will need to do the following:
Go to the main menu of the radio, ENTER <Media Player> -> <UPnP>.
It will scan for all available UPnP servers . Note, this may take a few seconds for the radio to complete its scan
and before the scan has completed, the radio will display '[Empty]'. The radio will continue to display '[Empty]'
if no UPnP servers and found.
After a successful scan. ENTER your UPnP server, by rotating the dial if there is more than one UPnP server, and
then press ENTER (note, your radio will display' Access Denied' at this stage)
Your PC will now prompt you that a device has attempted to connect to your UPnP server. In order to allow the
radio to have access to the media files, you will need to click the 'Library' tab from Windows Media Player 11 and
ENTER the <Media Sharing> item to open the 'Media Sharing' window.
ENTERing 'Media Sharing' for Windows Media Player 11:
From the 'Media Sharing' windows , the radio will be listed as an unknown device. Click on the unknown device
listed, then click the 'Allow' button and then click 'OK'. Allowing the Radio to Connect:
Note: When you are playing the music under UPnP, you are able to change the mode of playback via ENTERing Media
Player/Playback Mode.
20

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1003204610032047

Table des Matières